HYPER CLEAN: Easy Clean, Hydrophobic, Dust Repellent Coating For Ceramics

HYPER CLEAN: Easy Clean, Hydrophobic, Dust Repellent Coating For Ceramics

Nanocoating for exterior & interior treatment is a unique formula that develops an ultra-thin protective layer on surface after 30-45 minutes, this layer of liquid glass is easily applied in minutes and contains the following properties:

  • Hydrophobic & hydrophilic (less spotting)
  • Anti-static, less build-up of dust, dirt and air pollution
  • Anti-stick properties
  • High gloss & filling of micro scratches
  • Smooth finish
  • Easy2clean
  • Extremely Durable

Applying Hyper-clean coating brightens paint color and makes the surface smooth and glossy with a durability of months!

Areas treated with Nano-cleaner formulas stay clean for 300% longer than regular cleaners. Furthermore, they are protected against scratching and have hydrophobic properties.

Hyper-Clean formulas contain Nano-polymers (SiO2) that infiltrate into microscopic cracks and fill surface imperfections creating an ultra-smooth finish which inhibits the adhesion of fat, dirt, and lime scale.

Nano Clean formulas are an excellent solution for the maintenance and upkeep of any shiny surface and find many applications in households, Sanitary (basins, bath tubs, urinals, wall tiles etc.)

Hyper-Clean is chemically bonded to the ceramic substrate and will not wash away with use.

It is easy to apply and can be applied by the user himself with minimum effort.

It can be used to refurbish old ceramic ware in bathrooms and make it look new and shiny.

Treated surfaces can be cleaned with clear water and a moist cloth, without using heavy cleaning agents.

The frequency and time of cleaning are significantly reduced after a treatment with this product.



The surface to be coated with Hyper-Clean should be free from all dirt, oil contaminants & other impurities on surface.

In case of ceramic or sanitary ware a thorough cleaning is recommended to remove all contamination. (Any dirt or stain which remains and is coated over will get locked in and cannot be removed). The cleaned, fully dried ceramic or sanitary ware is now ready to be coated. New ceramic or sanitary ware can be cleaned with detergent, rinsed fully with water and thoroughly dried with cloth. Only clean and fully dry ceramic or sanitary ware should be coated.


Take a small, clean cotton or microfiber cloth and apply a small quantity 5 – 8 ml /m2 of Hyper-Clean on to it. Wipe the ceramic ware with the cloth so as to form a thin, even coating on the surface. Cover small sections at a time and repeat the process until the entire surface is covered. Excess material should be removed immediately by wiping on it. The liquid will solidify rapidly and all corrections need to be done within five minutes. Only a thin coating is needed for full protection.

III) Air Drying Time:

  • The coated surface should be left to dry for 30 minutes.
  • Additional results if left for maximum 3 days.


  • Quick and easy application can be done by anyone
  • Incredibly long-lasting (5 year warranty)
  • Easier and faster cleaning
  • Lower cleaning frequency
  • Biodegradable
  • Anti-static, anti-dust, anti-fingerprint
  • Non-adhesive (Oil & fat repellent properties)
  • With rain or water the surface develops self-cleaning properties
  • Protection against scratching
  • High quality gloss

Best Solution for Hotels, offices, Industries & Industries in services of Cleaning & Maintenance where cleaning and protection of Ceramic Surfaces ( Basin, Bath Tubs, Tiles) is of great importance.

If you’re interested how to make your Bathrooms Easy to Clean, you can visit us and buy Water Based Nano Coating. With this unique formula you’ll get:

– Easy to Clean and Water & Dirt repellent Bathrooms.

– Time economy due to the long-lasting cleaning effect of our product

– Money saving because of using less detergent.